Deluxe Prop Bundle

Sounds like you’re ready for the next step in your haunt setup!

The Deluxe Prop Bundle by Sinful Audio will get things moving; literally!

This is a $227.99 package available for the pre-order price of $200!  

No shipping charges.  

Pick up in your name at the Sinful Audio booth!

Midwest Haunters Convention
June 10th-11th, 2017

Basic Animated Prop KitProp Sound EffectsScream BoxUSB Drive
Manufactured from sturdy 1/8″ aluminum plate, this kit promises to stand watch over your cemetery, castle, lair, etc. for a long time. His movement rides on a 3 inch steel lazy Susan bearing assembly and the drive arm features a nylon roller for low friction. The included PWM speed controller allows you to adjust his speed to exactly where you want it.
Please read the product description completely before ordering. If you have any additional questions, please feel free to contact us.

You can view the complete plans for this kit HERE

This kit was designed to allow you to build your own custom animated prop without all of the hassle of chasing down a bunch of parts. With minimal care, this kit should last you a very long time.

Items included in the Basic Kit:

(1) Precision machined aluminum waist platform (completely assembled as shown)

(7) UMB-1 Universal Mounting Bases

(1) ST-1 1 inch PVC slip-T fitting

(1) 1 inch PVC cross fitting

(1) 4 inch x 1/2 inch PVC neck pipe and reducer

(3) 1 inch PVC 45 degree elbow fittings

(1) SJ-1 Spider Joint fitting

(2) 1 inch PVC 90 degree elbow fittings

(1) 1 inch PVC T Fitting

(2) Spine Brace Crossbars (F)

(1) Spine Brace Connector (H)

(1) Wire fastener for attaching arm

(32) Self drilling screws

(8) Wood Screws

(1) Tube of silicone grease

(1) 12 volt wiper motor

(1) Wiper motor drive pin and low friction roller

(1) 12 volt 5 amp power supply with PWM speed controller

What will I need to build this prop kit as shown here?

(1) 24″ x 15″ x 3/4″ wood base

(13) Feet of 1 inch schedule 40 PVC pipe

All of the screws and hardware needed are included!

Height of kit will be about 6 feet tall when assembled depending on the head you choose.

Tools needed to complete this build:

Tape measure


Hacksaw or PVC cutter

Cordless drill

Phillips screwdriver

Needle nose pliers

Rubber mallet

1- 30 Min. Looping Atmosphere
1 – 30 Min. Looping Atmosphere w/phrases (every 2 – 3 Minutes)
25 Individual Phrases
All sound effects are in MP3 format
Choose from Zombie, Ghoul, Pirate or Clown voices!
Don’t see your creature listed above?  Just ask us!  We create custom sound effects!

An inexpensive but great way to have motion activated sound effects for you props and displays!

  • Battery operated (3 AAA Batteries Included!) 
  • Uses MP3 files  (up to 105 seconds) and it repeats each MP3 file out of the built in speaker each time the heat sensor is activated. 
  • Size 2″X 3.5″X 1″
  • The sensor can “see” from 12 feet away in the dark or a well lit room.  
  • Mounting bracket for easy setup.  
  • 2 Operating Modes
    • Mode 1 will play ALL MP3 sound files loaded, one by one every time the sensor is activated.
    • Mode2 will repeat the same MP3 sound you choose in your list
  • Compatible with PC File System Only

Comments are closed.